» Pipe & Tube

Pipe & Tube

Standard specifications and technical requirements for various ferrous, non-ferrous alloy, and non-metal pipes and tubes.

ASTM A192/ ASME SA-192 Boiler Tubes

Standard, Size & Wall Thickness ASTM A192, identical with ASME SA-192, is the standard specification covering minimum-wall-thickness seamless carbon steel boiler and superheater tubes for high pressure service. The tubing sizes and thicknesses usually furnished to ASTM A192 are 1/2″ to 7″ [12.7 mm to 177.8 mm] outside diameter and 0.085″ to 1.000″ [2.2 mm to 25.4 mm], inclusive, in …

ASTM A179/ ASME SA-179 Seamess Tubes

Standard, Size, Manufacture & Heat Treatment ASTM A179, identical with ASME SA-179, is the standard specification covering minimum-wall-thickness cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. This specification cover tubes 1/8″ to 3″ [3.2 mm to 76.2 mm], inclusive, in outside diameter. The ASTM A179 tubes shall be made by the seamless process and …

ASTM A178 ERW Tubes

General Introduction ASTM A178, identical with ASME SA-178, is the standard specification covering minimum-wall-thickness, electric-resistance-welded tubes made of carbon steel and carbon-manganese steel intended for use as boiler tubes, boiler flues, superheater flues, and safe ends. There are three grades available: Grade A – low-carbon steel, Grade C – medium-carbon steel, Grade D – carbon-manganese steel. Sizes & Thicknesses The …

ASTM A135/ ASME SA-135 ERW Steel Pipe

ASTM A135, identical with ASME SA-135, is the standard specification for electric-resistance-welded steel pipe. It covers two grades of ERW steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750], with nominal (average) wall thickness up to 0.500″ [12.7 mm], and in nominal sizes NPS 3/4 to NPS 5 [DN 20 to DN 125] with nominal (average) …

ASTM A134/ A134M EFW Steel Pipes

The ASTM A134 EFW steel pipe refers to electric-fusion-(arc)welded straight seam or spiral seam steel pipe NPS 16 and over in diameter, with wall thicknesses up to 3/4″ (19.00 mm), inclusive. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of ASTM A134/ A134M. EFW steel pipes manufactured in accordance with ASTM A134 are …

ASTM A106 Seamless Pipe

ASTM A106, identical with ASME SA-106, is the standard specification for carbon steel seamless pipe for high temperature service. It covers pipes sized from NPS 1/8 [DN 6] to NPS 48 [DN 1200] with nominal wall thickness as given in ASME B36.10M. Pipe having other dimensions can also be furnished under this standard provided such pipe complies with all other …

ASTM A53/ ASME SA-53 Pipe

General Introduction Shijiazhuang Metalsin supplies a full range of ASTM A53 pipes ranging from 1/2″ to 36″ with nominal wall thickness from SCH 10 to SCH XXS, either seamless or welded, black steel or hot-dipped galvanized (HDG). Various seamless and welded pipes manufactured to ASTM A53 are available in stock. Scope Identical with ASME SA-53, ASTM A53 is the standard …

ASME B36.10M Welded and Seamless Steel Pipe

Scope ASME B36.10M is the standard specification for welded and seamless wrought steel pipes which are used for high or low temperatures and pressures. This standard is also extensively used for welded and seamless pipes made from other ferrous and non-ferrous alloys such as stainless steel, nickel, titanium zirconium,tantalum, aluminum and copper, etc. All materials shall be covered in corresponding …

ASME B36.19M Stainless Steel Pipe

Scope & Material & Tolerance ASME B36.19M is the standard specification for both welded and seamless stainless steel pipes. These stainless steel pipes may be used for high or low temperatures and pressures. This dimensional standard not only can be applied to wrought stainless steel pipes but can also be extensively applied to non-ferrous alloy pipes such as titanium, zirconium, …

Pipe and Tube

What’s a tube? The tube can be defined as a hollow product of round or any other cross section having a continuous periphery. It is also called as “tubing”. Round tubes are most often seen in piping and pipeline engineering. Various tubes or tubing are endorsed by relative ASTM and ASME standard specifications. The dimensions and tolerances are also specified …


    We have been dedicating ourselves to piping and pipeline engineering since the inception. The company provides integrated solution to package supply of various piping & pipeline materials, components, and equipment.


    Room 502, No.448 Heping West Road, Shijiazhuang, Hebei Province, China
    Tel: +86-311-89642206
    Fax: +86-311-67906676
    Email:  sales@pipingpipeline.com
    Whatsapp: 0086-15076331069

  • Service
    Work Time: 8:30-18:00
    Welcome to contact us at your best convenience.